Top 10 DIY Wall Clock Movement Mechanism – Clocks

As an Amazon Associate I earn from qualifying purchases.

1. TIKROUND

#ad

Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement,1/ 2 Inch Maximum Dial Thickness, 59/64 Inch Total Shaft Length.

#ad
TIKROUND #ad - Parameter: "i" shaft, drive long clock hands 10 mm to 450 mm; Total shaft length is 23. 5mm59/64 inch, thread length is 16mm5/8 inch. High torque "i" shaft clock movement:suitable for suitable for 9-13 mm 23/64 - 1/2 inches thickness clock panel.

Applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, craft clock, etc. Instructions - Included along with the movements. Young town manufactures the 12888 series in various models, makesure the existing shaft and threads before ordering and you will get the right replacement. Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-040
ModelTIKROUND-M-040

2. ULTNICE

#ad

ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts

#ad
ULTNICE #ad - Important : this model is a 5mm ordinary shaft, which is suitable for clock panel thickness of not more than 4mm, otherwise the front nut cannot be tightened and the clock cannot run ! !Due to different measuring tools and measuring methods, the measured length may be slightly different from the actual one.

The error is less than +-1. 5 seconds/day, and the power consumption is less than 200 microamps. Cannot Use Rechargeable Batteries. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. Thank you for your understanding!!! Screw shaft Diameter 7. 6mm. Size about : 5. 6 x 5. 6 x 1. 5cm/2. 2 x 2. 2 x 06inch. Diameter : the minute shaft diameter is 3. 6-3. 7mm, and the Hour Shaft Diameter is 5.
BrandULTNICE #ad
ManufacturerULTNICE #ad
Height0.63 Inches
Length2.2 Inches
Weight0.02 Pounds
Width2.2 Inches
Part Number21F2118PVNU

3. AILILIFE

#ad

3D Wall Clocks Home Decor, Aililife 3D Clock Hands, DIY Large Clock Movement Mechanism with 12 Inch Long Spade Hand

#ad
AILILIFE #ad - Enjoy the diy - 3d clock hands has an open design with just minute and hour hands. You can design your clock and room according to your habits, or share your design process with friends and family. Unique design - 3d clock hands fit clock dial over 25" diameter, easy and simple design with mute scanning movement, Introducing from high-technology which maximum reducing power consumption and effectively extending the life of the movement.

No harm to the environment and health. Our friendly customer service will be always with you whenever you need our technical support. Main function - applicable to cross-stitch, three-dimensional embroidery, craft clock;suitable for quartz clock repairing, replacing or making a clock£¬Large clock hands also can be used as a wall decoration.

Silence movement - silent sweeping, mute movement 3d clock hands will give you a quiet night. Our service: we believe you will love this 3d clock hands, If there is any problems, please feel free to contact us.
BrandAILILIFE #ad
ManufacturerAililife #ad
Weight0.6 Pounds

4. Outus

#ad

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement 13 mm

#ad
Outus #ad - 6 mm/ 024 inch; the clock movement mechanism are suitable for 1 - 3 mm/ 004 - 012 inch thickness of clock panel, when you install this clock movement kit, please check the sizes. Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits; There are various styles to choose which is very suitable for different styles of clock frames.

Quality material: the movement is made of abs material, which is light in weight and corrosion-resistant, and the clock hands are made of quality aluminum, sturdy for a long time to use, providing you with nice use and decorative effect. Clock design: the design of the clock hands are simple and stylish which have a various styles; The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.

Size: the total shaft length is approx. Widely applicable: these clock repair replacement parts are suitable for cross-stitch, frame-less wall clocks, craft clocks, 3 dimensional embroidery, especially for DIY quartz wall clock to replace for using.13 mm/ 05 inch, and clock hands fit clock face 25 - 35 cm in diameter, and the thread length is approx.
BrandOutus #ad
ManufacturerOutus #ad
Part NumberOutus-1338
ModelOutus-1333

5. Mudder

#ad

Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit Black

#ad
Mudder #ad - 90 mm 3. 5 inch; minute hand is approx. Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.

Warm notice: when you install it, please keep the hour hand and minute hand parallel. Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24. 6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel. Wide application: they are fit for cross-stitch, and specially suitable for DIY quartz wall clock replacement movement parts, three-dimensional embroidery, craft clock, frame-less draw clock, etc. Center of hole hand size: hour hand is approx. 120 mm 4. 7 inch; Second caps is approx. 7 mm 028 inch; please check the size before buying.
BrandMudder #ad
ManufacturerMudder #ad
Weight0.09 Pounds
Part Number43216-77972

6. Hicarer

#ad

Hicarer DIY Large Clock Hands 3D Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories

#ad
Hicarer #ad - Center of hole hand size: the hour hand is approx. 70 cm/ 30 inch. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx.

Home decoration: you can diy a simple clock as wonderful decoration, then hang and stick it on the wall in bedroom, kitchen, living room or office. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1. 5 v aa battery not included. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length; Second cap: approx. 7 mm/ 03 inch,please check the size before purchase. Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending.
BrandHicarer #ad
ManufacturerHicarer #ad
Height0.79 Inches
Length16.73 Inches
Width3.94 Inches
Part NumberHicarer-Clock Movement-01

7. Timelike

#ad

Timelike DIY Large Clock Hands Needles Wall Clocks 3D Home Art Decor Quartz Clock Mechanism Accessories Black, 3D Clock Hands

#ad
Timelike #ad - Any problem please feel free to contact us first so that we can supply the best service for you. Powered by 1*AA batterynot including. Hour hand length: 23. 5cm ; minute hand length: 31. 5cm; clock Dial: 104cm; material: alumnium. Make a statement by adding this funky clock to your home decor. Simple design: cool clock has an open design with just minute and hour hands. Our products have been well tested, examined and packaged before sending off, but we cannot 100% guarantee the items remain undamaged when delivered to you.
BrandTimelike #ad
ManufacturerTimelike #ad
Height1.73 Inches
Length14.57 Inches
Weight0.12 Pounds
Width5.43 Inches
Part NumberWall Clock
ModelSYNCHKG121954

8. TIKROUND

#ad

43/64 Inch Total Shaft Length.No Hands, Youngtown #12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Kit Sweep Silent Movement Black Shaft,3/8 Inch Maximum Dial Thickness

#ad
TIKROUND #ad - Movement total shaft length is 17mm 067 inch, thread length is 9. 5mm037 inch. Good for repairing, frameless draw clock, replacing or making a clock. Applicable to cross-stitch, three-dimensional embroidery, craft clock, etc. Package contents: a clock movement, a Brass washer and a Brass nut, a Plastic washer, come with the specially designed protect box and instructions. Movement suitable for 2-6 mm 5/64 - 15/64 inch thickness clock panel. Youngtown manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-058

9. Colaxi

#ad

Wooden Wall Clocks, Craft Clocks, Metal Wall Clocks, Colaxi DIY Mechanism Pendulum Movements Replacement for DIY Quartz Wall Clocks

#ad
Colaxi #ad - Suitable for cross stitch, frameless picture, floor clock, craft clock, three-dimensional embroidery, etc. Hand size: from round hole to the end of the : hour hand: 80mm / 67mm, minute hand: 110mm / 98mm, second hand 90mm, suitable for clocks over 250mm.

Suitable for diy quartz wall clocks, craft clocks, frameless wall clocks, replacement of broken clocks, wooden wall clocks, metal wall clocks, etc. Package include: 1x hourly time movement, 1x golden pendulum, 1x washer, 2x second hand, 2x minute hand, 2x hour hand, 1x westminster music box, 1x black rubber pad, 1x nut. Chiming pendulum movement plays the Westminster melody on the hour, automatically silences the chimes after 9:00 pm until 6:00 am. Features: swing your own diy clock or use it to repair or replace a broken wall clock.
BrandColaxi #ad
ManufacturerColaxi #ad
Part Number92308be5f919b7ec539c1d40e7f3bdea

10. Amazlife

#ad

3D Clock Hands, 3D Wall Clocks Home Art Decoration Silver, DIY Large Clock Movement Mechanism with Long Spade Hand

#ad
Amazlife #ad - Material: alumnium. Size:hour hand length: 23. 5cm ; minute hand length: 31. 5cm; clock Dial: 104cm;14. 6" high, 1. 7" wide. Main function - applicable to cross-stitch, three-dimensional embroidery, craft clock;suitable for quartz clock repairing, replacing or making a clock£?Large clock hands also can be used as a wall decoration.

Unique design:cool clock has an open design with just minute and hour hands, design with mute scanning movement. No harm to the environment and health. You can design your clock and room according to your habits, or share your design process with friends and family.

Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending. Powered by 1*AA batterynot including. Our products have been well tested, examined and packaged before sending off, any problem please feel free to contact us first so that we can supply the best service for you.
BrandAmazlife #ad
ManufacturerAMAZLIFE #ad